VUSE PRO

For information on how to use your Vuse Pro, including step-by-step instructions, please refer to our Vuse Pro user guide.

When the white LED flashes ten times, it is time to charge your device. Your Vuse Pro battery may run out before the Vuse ePod is finished, so don't automatically discard the pod when charging the device.

Using the charging cable provided, connect this to the base of your epod device and the other connection to a CE-certified plug with an output of 5v 1.0amp or from a USB port of a laptop or PC. Do not charge your device from a portable charging pack, TV or other audio/video equipment, games console or USB port built into a plug socket.

When your VUSE Pro is charging, the LED on the device will flash white. When your device LED turns solid white, your device is 80% charged. When your device LED switches off, your device is fully charged.

Using a dry cloth, clean the connectors on the device's base and the charging cable (ensure the charging cable is not connected to a power source). Then connect the charging cable to the device and connect the charging cable to a CE-certified plug with an output of 5v 1.0amp or a laptop or PC. If you do not see a light on your device, contact our Customer Care Team at 1800932710 or INFO.IE@VUSE.COM for further assistance.

Once the light has gone out on your Vuse Pro device, that is when it has been fully charged. Please allow up to 2 hours for a full charge.

A fully charged Vuse Pro should give you approximately 190 puffs. However, this may vary depending on usage behavior.

The build-up of dirt inside your Vuse ePod and the top of your device may prevent you from enjoying your experience. To prevent this, check and, if necessary, detach your Vuse ePod from the Vuse Pro device, clean with a dry cloth and carefully blow into the Vuse ePod to dislodge any build-up of dirt.

Electrical goods and batteries should not be disposed of as part of regular household waste. They should be separately collected for recovery and recycling. We are committed to minimising Vuse products' environmental impact – learn more about responsible disposal here https://www.vuse.ie/pages/disposal

It could be one of several safety or battery-related reasons: (1) Vuse Pro automatically shuts down if activated for more than five seconds at a time. (2) Your device may need charging. (3) You need to change your Pod. (4) Dirt might be blocking the connection between the device and the cartridge. Just clean it with a dry cloth.Please contact customer service if the above suggestions do not solve the problem.

It could be one of the following safety or battery-related reasons: (1) Vuse Pro automatically shuts down if activated for more than five seconds at a time. (2) Your device may need charging.

The traceability code is etched onto the bottom of the device and the metallic plate of the pod. Quote this code when contacting your Customer care team.

It is recommended not to leave batteries to charge unattended. Charging your device should only take about 60 minutes.

Your Vuse Pro should last about 300 complete charge/discharge cycles before battery efficiency deteriorates. This is common with all Lithium-ion batteries but will depend on your vaping behaviour. After this period, you can still use your Vuse Pro device, but you may need to charge it more frequently. Keep your Vuse Pro battery charged to maintain the battery life.